Shower Installation in Bradford, ON — New & Replacement
Whether you’re building a new home in Bradford West Gwillimbury, renovating an older bathroom, or upgrading from a tub-shower combo to a dedicated walk-in shower, The Plumbing Nerds handle the complete plumbing side of your shower installation. Red Seal certified plumbers, leak-free guaranteed, and full rough-in capability for new construction and additions throughout Bradford and Simcoe County.
Types of Showers We Install
Standard Shower/Tub Combos
The most common setup in Bradford homes, tub-shower combinations use a single valve that controls both the tub spout and the shower head. We install and replace the shower valve, supply connections, and trim — whether you're reusing an existing tub or converting to a new one. We also install all types of shower surrounds and enclosures in coordination with your renovation.
Walk-In Showers
Walk-in showers are the most popular bathroom upgrade in Bradford. Converting a tub-shower to a fully tiled, curbless, or curbed walk-in shower involves rerouting the drain, setting a new shower pan or membrane, and installing a dedicated shower valve and body sprays if desired. We handle all the rough-in and valve work so your tile installer can f
Shower Rough-In Work for Bradford New Builds
Bradford West Gwillimbury has seen consistent new home construction over the past decade, with multiple subdivisions developed throughout the municipality. New homes require shower rough-in work during the framing stage — before walls are closed, the drain, supply lines, and blocking for the valve must all be installed to the correct specifications.
We work with builders and homeowners in Bradford's new construction projects to complete shower rough-ins to code, including drain location, valve height, and proper blocking for grab bars in accessible bathrooms. Getting the rough-in right prevents costly corrections once the tile is on the wall.
Shower Valve Installation and Replacement
The shower valve is the most critical component in your shower — it controls temperature, pressure, and in thermostatic systems, holds your preset temperature exactly. A failing shower valve shows itself through:
- Inability to maintain consistent water temperature
- Reduced or fluctuating water pressure at the shower head
- Leaking around the valve trim or handle
- No hot water or scalding water despite adjustment
- A handle that turns but doesn't change the temperature
We replace all brands of shower valves, including Moen, Delta, Kohler, American Standard, and Grohe. In many cases, a worn cartridge inside the valve is the issue — a cartridge replacement is faster and less costly than a full valve replacement and resto
What Our Shower Installation Includes
- Supply line connection: Hot and cold supply lines are connected to the valve with proper soldering or push-fit connections, pressure-tested before walls close.
- Drain installation: We set the shower drain at the correct height for your shower pan or tile membrane and connect it to the branch drain line with a proper trap.
- Valve installation: The shower valve is mounted at the code-specified height with blocking and connected to supply lines. We install pressure-balancing or thermostatic valves to Ontario code.
- Shower head and arm: The shower arm and head are installed and aimed correctly, with proper thread sealant to prevent leaks at the wall connection.
- Leak
Frequently Asked Questions
Do I need a permit for a shower installation in Bradford?
A like-for-like shower valve replacement does not require a permit. Converting a tub-shower to a walk-in shower — which involves moving or modifying the drain and supply lines — requires a plumbing permit. New shower rough-in in new construction is part of the overall building permit. We handle permit applications for all permitted work.
Can you install a shower without tiling it?
Yes. We complete all plumbing work — rough-in, drain, valve, and trim — independently of the tile work. Many Bradford homeowners hire a separate tile installer and coordinate with us on sequencing. We can also install prefabricated acrylic or fibreglass shower surrounds as a complete no-tile alternative.
How long does a shower installation take?
A shower valve replacement with trim takes 2–3 hours. A full shower rough-in for a new walk-in, including drain relocation and supply line run, typically takes 4–6 hours. Steam shower generator connections add another 2–3 hours. We'll give you a specific timeline when we assess your project.
My shower has low pressure. Is that a plumbing issue?
It can be. Common causes include a flow-restricted shower head, a failing pressure-balancing valve cartridge, scale buildup in the shower arm, or low pressure at the supply line. Bradford's hard water causes scale accumulation inside shower components faster than in low-hardness areas. We'll diagnose the actual cause and give you the right fix — not just a new shower head.
Can you relocate the shower drain during a bathroom renovation?
Yes. Drain relocation is a common part of bathroom renovations that convert a tub-shower to a walk-in or change the shower's position. It involves cutting the subfloor, rerouting the branch drain, and establishing the correct slope to the stack. This is work that requires a licensed plumber and typically a permit — we handle both.
Ready to Book? Call Our Bradford Team
Based at 762 Miller Park Ave, Bradford — faster response than any GTA company.
